Chevy Astro and GMC Safari Forum banner

How to remove door panel?

12K views 3 replies 2 participants last post by  red98tj 
#1 ·
Hi. I need to replace the drivers side power window motor on my 2000. Is the interior panel held in place by plastic clips around the perimeter only, or are there other fasteners to remove? I just dont want to break anything trying to get it off. thanks :banana:
 
#2 ·
nevermind, I found a good writeup about this here,
http://www.ehow.com/how_5259811_remove-chevy-astro-door-panel.html

It looks like the armrest portion comes out separately. That is good as I can bring it inside and install the new plastic cap I bought for it (The vinyl is cracked). It is too cold out now for the silicone to cure properly.
 
#4 ·
Yes, thanks. I finished up the job today. I could not find any metal screws the right size to fill in the drilled out rivets, so I just clocked the motor slightly and installed 4 self tap sheet metal scews.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top