Finally figured it out. :)

[MySafari]

When I posted that my wifes van was running - I was wrong. Im referring to - Need your opinion.
After following the advice from others my van did run better but continued to die when driving.
What I did was tap the side of the distributor cap with a screw driver while the van was running, It would die. Tried it again and it died again.
I havent decided if its the Ign Module( it tested ok) or the dist pick-up but after a dist. swap the van is running good.
I started this adventure on April 27th and finished on June 3rd.
Thanks again for the input from everyone as I found several things that needed fixed or replaced.
Just wanted to let people know what it took to get it going. Hope this might help someone else . Mike

[My1988Astro]

Awesome job there Mike! Feels good to get results from your efforts and it doesn't hurt that the wfe believes in you again, hey?

Glad things turned out well this time. Keep up the good work and the good posts!

[Leeann_93]

Glad you got 'er running!

[Big_kid]

Thanks for letting us know!

[MySafari]

Looks like that was the problem. Van is still running great after 5 days.
Just picked up new upper plates today so will get those on this week.
I hope my solution will help someone else in the future, Although I dont think hitting it with a screwdriver is a recommended service procedure.
Thanks again. Mike

[AstroWill]

Although I dont think hitting it with a screwdriver is a recommended service procedure.

I actually think that is a direct quote from the manual

Glad you got it fixed!

[Big_kid]

That's how you test a knock sensor- why not an ignition module too?!