[grandamle91]

Does anyone have any pictures of replacing all the bearing and seals in the rear end. I have a 91 chevy astro and its leaking like crazy, pours out as fast as you put it in.

Thank You

 

[ihatemybike]

No, but I did the job on my 1994 back in the day with only a Haynes manual to help me. Worst part for me was getting the brake drums off. Ended up destroying one.

 

[grandamle91]

thank you illl see if i can pick one up on ebay cheap, i wounder if my service manual from gm has anything on it

 

[Mr_Bowtie]

This is probably a long shot, but one thing to check is that the vent tube is clean/venting good. I had a rear end that was leaking bad only while driving it and ended up being the vent tube all along. Ya never know.

 

[grandamle91]

this one leaks no matter what, but ill give it a look

 

[romeroom]

...Worst part for me was getting the brake drums off. Ended up destroying one.

One of my rear drums always get's stuck to the point where not even applying a little heat with the propane torch helps.

Years ago I discovered the magic of using an 8" 3 jaw puller to get the drum off. One of the best $17 dollars I've ever spent.