Chevy Astro and GMC Safari Forum banner

Cad Modeling project - Radiator Core Support ??

3372 Views 46 Replies 16 Participants Last post by  sixsix
Everyone knows about the wonderful radiator core support issue. I am wondering if anyone would be Willing/Able to model up the lower section to develop a template where these could be cut out of sheet material and welded together?

It would greatly ease trying to source good parts.
  • Like
Reactions: 1
1 - 2 of 47 Posts
I have no current need for a replacement core support, but if I had a van with that rust problem, I would definitely be excited to have the opportunity purchase a set of CAD plans for fabricating a replacement.
Most metro areas have fab shops that could covert those drawings to the parts necessary for fabrication.
With the cost of shipping relatively heavy parts, I would think local fabrication would be cost effective.
And if you have the tools/experience to weld it up yourself, so much the better.
Rod J
On my screen, I go to the upper right corner there the three dots are. Just to the left is my avatar. By clicking on that, the drop down gives you several choices ( Profile, Alerts, Conversations; etc.)
Choose 'Conversations' and put in AsstroWills name, subject and message in the appropriate boxes.
I think I got that right.:).. good luck
Rod J
1 - 2 of 47 Posts