[tigerpwr]

I recently bought a used belltech flip kit for the rear (and spindles for the front) and in the process have learned about the different springs for the vans.

Well, the kit I bought was used on a later van with regular leafs but my van has the mono springs. Can I just get regular leafs and still use the flip kit on my van?
:feedback:

Thanks!

 

[Matrixx]

Hi tigerpwr

Their were a lot of discussions about this on the Old Forum.

Here are a couple links to get you going.

Old Forum Discussion link:
cgi/ib/ikonboard.cgi?act=ST;f=12;t=5968;hl=steel++leafs

Old Forum Search Link:
cgi/ib/ikonboard.cgi?act=Search&CODE=02&SID=49c7ad9f57ca33fa
cgi/ib/ikonboard.cgi?act=ST;f=12;t=17485;hl=composite+spring+coversion

Spring Conversion Kit:
http://stengelbros.3dcartstores.com/AST ... -1081.html

Hope this helps.

 

[tigerpwr]

Okay, I've read almost everything there and a couple related links in the search query. I have the forward shackles so probably just need the leafs. The guy I bought my kit from had the 3 piece springs, so I'm going to look at the junkyard for some 4-leafs.

THanks MAtrixx