[AlpineVan]

(1995 GMC Safari AWD with AC. No rear heat, no rear AC)

I'm noticing the heater hoses (from the heater valve to the engine) are very hard to come by. They both bend tightly at the heater valve, and one of them is crimped to a hard line on the water pump side. So I don't believe replacing with bulk hose is the best option.

Are there community solutions for these parts? Or are there part numbers that I should be looking for?

Regards

 

[M_a_t_t]

I don't remember having a crimped connection on my v6. Just 2 barb fittings threaded in, one on the water pump and one in the intake. Do you have a picture?

 

[AlpineVan]

Followup; nobody had the hoses so I just ran bulk rubber tubing for the heater.

The trick with it is you do have to be careful about it rubbing against other parts, so I've sheathed it in larger rubber tubing for protection, in areas.