[mprtftr3]

I have a friend that has the AIr8000 system from AUTOLOC and we are having problems figuring out the diagrams that are included with the system. We've gone back to the site and printed the newest instructions but it seems that these are all for dual port bags. He has single port bags. Could this be the problem or is there a special way that the single port bags have to be done as far as plumbing in the commander. HELLLLLLPPPPP!!!!!!!

 

[RydQlty]

I took a look at the instructions on the Autoloc site.
And using a "T" fitting on a single port bag would correct that problem.
On one side of the T fitting connect the Pump Valve, and on the other side of the T fitting the Dump Valve.
According to the diagram, you need to place a pressure sending unit to the bag as well, that can be done from either the pump valve side or the dump valve side.
Does this make any sense to you, if not I can try and draw a simple diagram for you.
Let me know.