[carruthers77]

ok, first off thank you for stopping by, my goal is to get my van a total of 3 inches lowered all the way around, now i am familiar with factory suspension not sitting level. so do i need 3 inch spindles in the front and a 4 inch flip kit in the rear? or are these vans fairly level to start with that i can get away with 3 inch drop spindles and 3 inch flip kit for the rear. additional question, do i need to change anything with the steering alignment or geometry when using drop spindles? thanks to everyone in advance for any help, im new to lowering vans and i am walking into this cautiously. fyi The Astro is a 1996 LS 4.3 vortec.

 

[akforceten]

is this awd? or rwd?

 

[Jasekcco]

This is very similar to the same kit I used to lower my S10, easy install and just needed to get an alignment.

http://djmsuspension.com/product/djm2371-23/