[castle_Rock]

Ok, this is weird - Yesterday I was driving to a Pull a Part Yard, and I noticed that when I use the Left turn signal, its a solid light both inside the dash and the lights outside, however, the right turn signal works flawlessly, I checked fuses, all is good, people think a brake light is out but its a turn light. LOL

 

[rj_whitten]

Did you find a fix for this?

 

[Leeann_93]

Generally, replace the bulb. One of the elements is broken, causing the solid light.

 

[Big_kid]

Generally, replace the bulb. One of the elements is broken, causing the solid light.

X2. You have a bulb out (or other cause of an open circuit).

 

[fungus2k]

did you check the relay as well?

 

[castle_Rock]

Generally, replace the bulb. One of the elements is broken, causing the solid light.

Yep, it was the bulb in the tailight - I replaced it, and it works now, but its erratic, not slow like the right turn signal.

 

[Leeann_93]

Did you check/clean the socket while you had the bulb out? If the socket is clean and clear of corrosion, I'd start tracing the wiring.

 

[Big_kid]

Check the front socket too.

 

[castle_Rock]

Got the issue fixed, I actually bought a single filament bulb, and needed a 2 filament, so back to the AZ to get the correct bulb, they all look the same.

 

[Leeann_93]

Got the issue fixed, I actually bought a single filament bulb, and needed a 2 filament, so back to the AZ to get the correct bulb, they all look the same.

Glad you got it fixed

 

[Big_kid]

Were your dash lights coming on when you stepped on the brake?