Joined
·
374 Posts
So I’m wiring up an np236 transfer case and I’ve come across something that my limited diagram knowledge isn’t sure about. The first diagram is of the four button dash switch with the eight wire plug on the bottom and the three wire plug on the top. The black wire on the eight wire plug runs from G to pin F12 in the TCCM plug.
The second diagram is of the six pin plug from the transfer case to the TCCM plug it has a black and white wire also landing on F12 in the TCCM plug am I supposed to land both of these wires on the same pin? They both seem to be labeled as ground.
Thanks for any help
![Rectangle Schematic Font Parallel Engineering]()
![Rectangle Font Parallel Handwriting Pattern]()
The second diagram is of the six pin plug from the transfer case to the TCCM plug it has a black and white wire also landing on F12 in the TCCM plug am I supposed to land both of these wires on the same pin? They both seem to be labeled as ground.
Thanks for any help
