Anything to do with the outer exterior of your van. Discuss all body modifications and repairs including fenders and bumpers, hoods and grilles, or doors and windows. All body related things like body panels and handles, wipers and roof racks, mirrors and trim.
August 27th 2012, 2:50pm
As some of you may know, snow was found in Maine. I said **** this ****, I'm undercoating. I wanna know, how is the right way to do it? What do I undercoat? I have it in a spray can. I was thinking of scraping down the old, loose rust and just spraying it all down. Everything under there. Most of you are from the east, so maybe undercoating is unnecessary. Thanks.
August 27th 2012, 3:03pm
Yep you got it. Scrape off all the rust you can. Wire brush it after that if you feel frisky. Then hose it all down with the undercoating.
August 27th 2012, 3:12pm
Look at that. A reply in a matter of minutes, not days. Can you believe I'm still waiting for a reply to my cruise control issue on the Furd forum? Its been like two days, and it has only like 5 views.
August 27th 2012, 3:30pm
I spray in the nooks and crannies first. They take longer to dry. I have a wire brush for my drill it makes it easy and fast. Ware something you never want to see again too. It goes everywhere. I wore goggles and a hat.
August 27th 2012, 3:38pm
ccookie66 wrote:Look at that. A reply in a matter of minutes, not days. Can you believe I'm still waiting for a reply to my cruise control issue on the Furd forum? Its been like two days, and it has only like 5 views.
Your the one who went and got a FURD and went to the FURD forum.
Guess we weren't good enough for you anymore.
August 27th 2012, 3:59pm
Don't say that Randy. Of course you guys are good enough. Remember, that Astro would be a tin can if it wasn't for you guys. You guys really helped me out. Couldn't do it without you.
I did NOT want a Furd. Plus, the only reason I went to a Furd forum is because I didn't think it was right asking questions about a Furd on a Chevy site. We got it for $300 because the Astro quit running. I decided to fix the Astro, while the Furd replaced it temporarily. Actually, come to think of it....when I was like 8, I remember asking my dad if someday I can drive the Astro. It sat out there year by year. I would go out and sit in the drivers seat. I always dreamed of it. The very best car I have ever drove or rode in.....never gonna let go of it. There is nothing out there like it. If something major happens to it, I rebuild it. It will ALWAYS be in the family.
August 27th 2012, 6:29pm
i live in nova scotia and use rust check or fluid film as a good barrier. make sure you hit the rockers, fuel, brake lines hard. i just bought a 2000 that was undercoated every year and very little rust on it
November 30th 2012, 3:24pm
ccookie66 wrote:As some of you may know, snow was found in Maine. I said **** this ****, I'm undercoating. I wanna know, how is the right way to do it? What do I undercoat? I have it in a spray can. I was thinking of scraping down the old, loose rust and just spraying it all down. Everything under there. Most of you are from the east, so maybe undercoating is unnecessary. Thanks.
hey forrest i have a post in this reguard '100% rustproofing if u havent done it yet take a look, i guarentee itl work
January 10th 2013, 1:50pm
Being from this area of the country I have to say a few things: Undercoating is a band-aid fix at best and if you don't do it correctly then its pointless. So first you need to wash as much grease dirt and such off. Then wire brush and sand where ever you can. Then go to a car wash and wash the **** out of it again to knock loose crap off. After all that you need to get a couple cans of Rustoleum paint and paint as much as possible . after that drys then you undercoat. This will get much more areas sealed from the elements. Some times you can get Rustoleum in any off color cheap at Walmart because new colors came out. Also this spring I will be removing my body mounts to replace with poly mounts I have left over from another project so if you remind me come warmer weather you can have the stock ones just pay shipping from NH to you or we can meat somewhere 1/2 way. Mark
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.