Chevy Astro and GMC Safari Forum banner

NP236 from the factory?

2K views 5 replies 4 participants last post by  joeg 
#1 ·
I looked up my VIN on https://chevroletforum.com/forum/vindecoder.php and noticed something interesting on the transfer case:
Screen Shot 2017-07-01 at 5.16.10 PM.png


The NP236 is a two-speed transfer case from the S10, isn't it? Is it possible my van has it functioning in "AWD" mode and I just need to wire up the buttons or am I missing something?

If it's even possible, I'll crawl up under there... I assume it would be marked somewhere?
 
See less See more
1
#2 ·
That would be very cool. The 236 has a much longer encoder motor.
 
#4 ·
I'm going to guess the site is wrong. You have an NP136.

Easy to check; slide underneath and look at the round red tag on the back of the case.
 
#5 ·
Leeann_93 said:
I'm going to guess the site is wrong. You have an NP136.

Easy to check; slide underneath and look at the round red tag on the back of the case.
You're probably right... I wasn't even sure if it would be possible to have the NP236 without the controls. I'll take a look tomorrow to confirm. Nothing else on that page was incorrect for mine, so it piqued my curiosity.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top