rear suspension pics

[SSAstro]

i need 4-link, 2-link, 3-link pics so i can get a good idea of how i'm going to do this so i can take the mono-leaf out i was looking at doing a 2-link but have no idea where to start

[layedout94astro]

go 4-link. tomorrow if i get time and remember i'll take pix of my 4-link

[SSAstro]

heres how it sits now and still have an inch more now


i'm also using this bag setup from sd http://www.suicidedoors.com/BehindandUn ... esRE-8.php

[SSAstro]

did u ever get those pics

[Hawaiian punch]

i need 4-link, 2-link, 3-link pics so i can get a good idea of how i'm going to do this so i can take the mono-leaf out i was looking at doing a 2-link but have no idea where to start

you can see a little of the triangular 4 link set up I have, if you need a better shot let me know, I'll go under and take a better shot ok.

[SSAstro]

If you have pics of the whole setup it would be great like the front bars and all the mounts on the axle

[Hawaiian punch]

If you have pics of the whole setup it would be great like the front bars and all the mounts on the axle

You got it!! give me a day when its sun light here and I'll take what you need.

[mattconrad]

its hard to tell by the pics, is this a reverse triangle 4 link or forward

[Hawaiian punch]

its hard to tell by the pics, is this a reverse triangle 4 link or forward

yes reversed triangled 4 link.

[SSAstro]

if there is also anyway to get dimensions on all the bars that would be great i was going to get one from sd

[Hawaiian punch]

if there is also anyway to get dimensions on all the bars that would be great i was going to get one from sd

ahh shoot, ok, like length wise or both diameter and length? im gonna take pics today and have it posted up.

I tell you what, I'll go ahead and measure both length and width ok? that way it'll make it easier for you my friend.

[SSAstro]

hey thanks this is all new to me and i made a post on the old board and never got anything back i mean i know how to do a 4-link on my blazer but these astros are so different b/c of the frame that we really don't have

[SSAstro]

hey and i just sent you pics of where the front shocks go i'll get more later

[Hawaiian punch]

hey and i just sent you pics of where the front shocks go i'll get more later

Got um!! Mahalo nui loa!! (thank you very much)
heres the pics you been waiting for buddy!

[SSAstro]

Thanks hows it ride i get alot of wheel hop from mine and right now i have a monoleaf but it did even before i mono leafed it ever since i baged it does it and it never did it before also do you have a front sway bar installed or not

[Hawaiian punch]

Thanks hows it ride i get alot of wheel hop from mine and right now i have a monoleaf but it did even before i mono leafed it ever since i baged it does it and it never did it before also do you have a front sway bar installed or not

rides real good! no wheel hop.

[layedout94astro]

Who's bag set up is that? And are those lower and upper rear bag brakets bolt in?

[Hawaiian punch]

Who's bag set up is that? And are those lower and upper rear bag brakets bolt in?

full on bolt in air bag brackets.
the pictured set up is of my van.

[SSAstro]

hey did they put the lower bars to the stock leaf Shackles and who did the work or where can i get those bolt in brackets like you have b/c if i could everything made like yours it would save time except for i wanted to do like a parallel 4-link

[Hawaiian punch]

hey did they put the lower bars to the stock leaf Shackles and who did the work or where can i get those bolt in brackets like you have b/c if i could everything made like yours it would save time except for i wanted to do like a parallel 4-link

yes to the stock leaf shakles.

heres a company who made sorta my set up, some things were fabricated though like the threaded trilink bars that head towards the back, they didnt come that way.

"aim industries" http://www.truckn.com
theyre located in Mesa Arizona