Bad Bushings ? Common Lifted Astro Noises ?

[MI_Ghost]

My simple confusions comes from how many different posts have most replacing half the parts and calling it a total front end rebuild. So far i'm at 600 just in parts and planned on having a shop do the labor. Noticed some differential bushings worn out as well but doesn't look like moog makes em. See anything i missed ?

Moog K6329 Control Arm Bushing Kit
$11.93
2
Moog K6437 Sway Bar Bushing Kit
$8.99
1
MOOG RK620719 Control Arm with Ball Joint
$58.87
2
Moog K80631 Stabilizer Bar Link Kit
$16.59
2
Moog K6291 Ball Joint
$35.99
2
Moog ES3254RL Tie Rod End
$32.78
2
Moog ES2838RL Tie Rod End
$19.51
2
Moog ES2004S Tie Rod End Adjusting Sleeve
$8.99
2
Moog DS1318 Drag Link
$76.78
1
Moog K6392T Idler Arm
$67.64
2
Moog RK620720 Control Arm and Ball Joint Assembly
$40.82
1
Subtotal (19 items): $584.25

Double check your list.
I'm seeing control arms w/ball joints and then more ball joints and bushing kits.
The control arms should already have the bushings and ball joints installed. There should be no need to buy them separate.

You only list 1 Moog RK620720 Control Arm

[ormoto]

Moog RK620720 Control Arm and Ball Joint Assembly
$40.82
MOOG RK620719 Control Arm with Ball Joint
$58.87

So i'm planning on getting the tops with new ball joints and bushings already installed and the lowers i'm buying ball joints and bushings separate and having them pressed it ! Thank you for looking over it !

[MI_Ghost]

Moog RK620720 Control Arm and Ball Joint Assembly
$40.82
MOOG RK620719 Control Arm with Ball Joint
$58.87

So i'm planning on getting the tops with new ball joints and bushings already installed and the lowers i'm buying ball joints and bushings separate and having them pressed it ! Thank you for looking over it !

OK, Both upper control arms.
Moog RK620720 - Driver side (QTY:1 listed - Good)
MOOG RK620719 - Passenger side (QTY:2 listed) You only need Qty:1

[Rinny]

Moog RK620720 Control Arm and Ball Joint Assembly
$40.82
MOOG RK620719 Control Arm with Ball Joint
$58.87

So i'm planning on getting the tops with new ball joints and bushings already installed and the lowers i'm buying ball joints and bushings separate and having them pressed it ! Thank you for looking over it !

Why aren't you buying the bottom control arms all set up?

[MI_Ghost]

Here are the lower control arms. Complete with ball joints and bushings.
Part No: RK641492
Control Arm and Ball Joint Assembly
Front Left Lower

Part No: RK641493
Control Arm and Ball Joint Assembly
Front Right Lower

[ormoto]

I was going to just have them pressed but decided to order them built. Didn't realize Moog was free shipping after 115.00 so that will work out even better. Monster of parts in rout

[ormoto]

Complete Front End Rebuild.

Control Arms Top/Bottom

Idle Arms / End Links / Drag Bar / Tie Rods top/bottom

(new power steering pump on a side note, and bled hydro system per Chevy specs)
New Alignment


And Van pulls hard hard right under braking...

Calipers are 6 months old, pads / rotors the same.

Didnt pull at all to the right before front end rebuild.


All suspension parts brand new from Moog

Do hydro boost or masters cylinders go bad sometimes while doing power steering pump ?