Switch to full site
Engine Repairs, Modifications, Diagnostics, Tuning, Upgrading, Questions.

<a href="https://ad.doubleclick.net/ddm/trackclk/N8334.275400VERTICALSCOPEINC./B20209277.204028354;dc_trk_aid=407011718;dc_trk_cid=94070067;dc_lat=;dc_rdid=;tag_for_child_directed_treatment="target="_blank"><img src="https://tpc.googlesyndication.com/pagead/imgad?id=CICAgKDrrqWwMRCAARgcKAEyCN4sAjjtai4k" border="0" align="right">
<IMG SRC="https://ad.doubleclick.net/ddm/trackimp/N8334.275400VERTICALSCOPEINC./B20209277.204028354;dc_trk_aid=407011718;dc_trk_cid=94070067;ord=;dc_lat=;dc_rdid=;tag_for_child_directed_treatment=?" BORDER="0" HEIGHT="1" WIDTH="1" ALT="Advertisement">
Post a reply

locating/removing IAC on a '95 CPI

January 28th 2010, 8:50pm

i have a sneaky suspicion(sp?) :think:...that my IAC is acting crumby, causing my rough idle. could someone please post a picture or diagram to it so i don't remove the wrong dang sensor lol.

also, any tips on cleaning it would be helpful
Last edited by Need For Steve on January 29th 2010, 12:14am, edited 1 time in total.

January 29th 2010, 12:11am

for those of you Search monkeys like me, trying to find the IAC's EXACT location; it's directly on top of the TB. first, remove your airbox, and intake tube, be sure to unplug your IAT sensor from the intake tube...you kinda need that :D. you'll need an 8mm socket to remove the 3 (i was told 2, but there's 3) throttle cable bracket bolts, and move that out of the way to the side. now, get a torx bit (i wanna say T-20, not sure) and remove the 2 screws holding the IAC in it's housing. they may be really hard to remove, mind had red sealant on the screws themselves. once those are out, the IAC will come out with a slight bit of pressure pulling straight to the passenger side (outward from the housing, it's simple to figure out). clean the o-ring, 0-ring seat and the sensor tip with a bit of Alcohol. also, clean the edge of the "seat" around the edge of the spring housing. once it's clean and DRY!!!!!, put it back in. if you're lucky like me, and this was your problem, you're idle should now be smoother than you've felt it in a VERY long time!

hope this helps someone! :D
:layrubber:

Re: locating/removing IAC on a '95 CPI

January 29th 2010, 2:45am

Good info, thanks!
Best pic I got:
Image

Re: locating/removing IAC on a '95 CPI

January 29th 2010, 4:11am

Glad you got it fixed! Wanna do mine now? I'll drive down to you. :lol:

Re: locating/removing IAC on a '95 CPI

January 29th 2010, 5:44am

Big_kid wrote:Glad you got it fixed! Wanna do mine now? I'll drive down to you. :lol:


ahaha :lol: , i promise it isn't hard at all. you may even find a treat or two in your airbox. i had a stash of acorns in mine :D
Post a reply