Chevy Astro and GMC Safari Forum banner

After replacing idler arms 2003 2wd

658 views 0 replies 1 participant last post by  fitter 
#1 ·
Purchased both from a company that sold China parts . Both were short in height from top of bracket to start of taper by 1/4, c to c were right on. Both the cotter pins were below the castle nut. Wondered if it's normal that the bracket to arm is so tight needs a hammer to move and is it necessary for a alinement. Part numbers are correct and since they only cost $31 and im tired of the run around ill buy something better because van steers terrible.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top