Switch to full site
The purpose of an Automatic Transmission is similar to that of a manual transmission, the auto tranny's primary duty is to allow the engine to operate in its narrow range of speeds while providing a wide range of output speeds.
Post a reply

P2761 code keeps popping up

October 27th 2020, 4:17am

Have an 04 AWD that keeps popping a p2761 code TCC control solenoid circuit,aside from the solenoid and wiring harness in the pan --all the solenoids and wiring in the pan was changed due to damage to the clips and I wanted to eliminate that as a cause. Other than that it drives fine no weird shifts of slippage BUT the CEL will start to flash if you accelerate hard. Even with the engine not running the code will come right back if cleared. What should I be looking for at this point..

Re: P2761 code keeps popping up

October 27th 2020, 1:53pm

An actively flashing CES light indicates a misfire.

Your code sounds like a poor/intermittent connection somewhere along the circuit.
Post a reply